Избранные проекты SIPANEL
Десятки реализованных проектов в промышленных, аэропортовых, медицинских, коммерческих и спортивных объектах Ирана. От большепролетных конструкций до сложных архитектурных оболочек — примеры инженерных решений SIPANEL.
32-Bed Military Hospital
- Название проекта
- 32-Bed Military Hospital
- Локация
- Raz & Jargalan, North Khorasan, Iran
- Площадь m2
- 1,000 m²
- Тип системы
- Sandwich Panel Systems
Главная задача
During the COVID-19 emergency, a fully operational 32-bed military hospital was needed from excavation to readiness in under 50 days, requiring full EPC coordination.
Инженерное решение
Engineering teams coordinated full EPC delivery — from excavation and structural construction to sandwich panel envelope, internal partitions, and final readiness — within an emergency timeline.
Измеримый результат
A fully operational 32-bed military hospital was delivered from excavation to readiness in less than 50 days during the COVID-19 emergency.
Предотвращенные риски
- Schedule overrun beyond 50-day target
- Coordination failures across EPC disciplines
- Envelope weather protection delays
Mehrabad Airport Aircraft Hangar
- Название проекта
- Mehrabad Airport Aircraft Hangar
- Локация
- Tehran, Iran
- Площадь m2
- 5,000 m²
- Тип системы
- Sandwich Panel System
Главная задача
The main challenge was the severe curvature of the structure and the need for accurate sandwich panel installation over a continuous curved geometry.
Инженерное решение
Precise coordination between the space frame, substructure, and panel installation sequence to preserve the curved form and avoid visual breaks.
Измеримый результат
Successful execution of 5,000 m² of sandwich panel covering while maintaining the geometric continuity of the curved surface.
Предотвращенные риски
- Visual breaks on curved roof surface
- Installation errors on curved geometry
- Mismatch between structure and covering system
Erbil Eye Hospital Entrance Canopy
- Название проекта
- Erbil Eye Hospital Entrance Canopy
- Локация
- Erbil, Kurdistan Region, Iraq
- Площадь m2
- 1,500 m²
- Тип системы
- Polycarbonate Cladding & Space Frame
Главная задача
The project required translating a symbolic architectural concept into a buildable structure while preserving the visual expression of the eyelid, iris, and eye geometry.
Инженерное решение
Precise three-dimensional geometric control, custom cladding detailing, and phased installation to preserve the architectural intent throughout construction.
Измеримый результат
Successful completion of approximately 1,500 m² of polycarbonate enclosure while maintaining the intended eye-shaped architectural identity.
Предотвращенные риски
- Loss of architectural eye geometry
- Distortion of eyelid and iris forms
- Mismatch between structure and enclosure
Tabas Railway Facility
- Название проекта
- Tabas Railway Facility
- Локация
- Tabas, Iran
- Площадь m2
- 10,000 m2
- Тип системы
- Sandwich Panel Roofing System
Главная задача
A large double-curved railway structure required advanced sandwich panel coordination, precise structural alignment, waterproofing continuity, and long-span roof performance.
Инженерное решение
SIPANEL applied custom panel detailing, structural alignment studies, drainage optimization, and installation sequencing for long-span performance reliability.
Измеримый результат
The railway roof was delivered with durable sandwich panel performance, controlled installation quality, and efficient execution.
Предотвращенные риски
- Structural misalignment
- Drainage failures
- Panel deformation
Mahshahr Taxi Parking Facility
- Название проекта
- Mahshahr Taxi Parking Facility
- Локация
- Bandar Mahshahr, Khuzestan, Iran
- Площадь m2
- 4,000 m2
- Тип системы
- Sandwich Panel Roofing System
Главная задача
A humid coastal parking facility needed sandwich panel roof coordination, rainwater drainage management, waterproofing continuity, and corrosion-resistant detailing.
Инженерное решение
SIPANEL optimized drainage slopes, gutter positioning, downspout coordination, and sandwich panel alignment to improve water evacuation and reduce maintenance risk.
Измеримый результат
The roofing system was delivered with reliable rainwater management, durable weather protection, and controlled drainage performance.
Предотвращенные риски
- Water accumulation
- Roof leakage
- Corrosion-related failures
Ahvaz Airport Passenger Terminal
- Название проекта
- Ahvaz Airport Passenger Terminal
- Локация
- Ahvaz, Iran
- Площадь m2
- 4,000 m²
- Тип системы
- ZIP-TECH Roofing & Aluminium Cladding
Главная задача
The main challenge was the curved front architectural feature, where the covering had to be bent in a perpendicular direction, making the execution technically difficult.
Инженерное решение
Custom execution detailing, geometric control of the curved form, and precise coordination between substructure, aluminium panels, and ZIP-TECH system.
Измеримый результат
Successful execution of 4,000 m² of ZIP-TECH and aluminium cladding while preserving the curved architectural form and final visual quality.
Предотвращенные риски
- Visual breaks in curved facade
- Incorrect perpendicular bending
- Mismatch between cladding and substructure
Tehran Mall Roof Garden, Food Court & Cinema Roof
- Название проекта
- Tehran Mall Roof Garden, Food Court & Cinema Roof
- Локация
- Tehran, Iran
- Площадь m2
- Approx. 7,000 m²
- Тип системы
- Space Frame + Sandwich Panel Roofing
Главная задача
Creating large column-free commercial and entertainment spaces while meeting architectural and structural requirements.
Инженерное решение
A long-span space frame system was selected to maximize open space, reduce structural weight and improve construction efficiency.
Измеримый результат
Successful completion of a large-scale roofing structure serving multiple public-use functions within Tehran Mall.
Предотвращенные риски
- Excessive structural loads
- Operational interference from columns
- Large-span construction challenges
Megapars Mall Atrium
- Название проекта
- Megapars Mall Atrium
- Локация
- Iran
- Площадь m2
- 4,500 m2
- Тип системы
- ZIP Roofing System
Главная задача
A large-span atrium roof required curved ZIP panel coordination, waterproofing integrity, thermal movement control, and clean architectural integration.
Инженерное решение
SIPANEL prepared ZIP panel layouts, expansion movement studies, drainage coordination, and installation sequencing for long-span roof stability.
Измеримый результат
The atrium roof was delivered with reliable waterproofing, precise standing seam execution, and controlled architectural integration.
Предотвращенные риски
- Water penetration
- Thermal expansion stress
- Roof alignment deviations
Absaar Water Park
- Название проекта
- Absaar Water Park
- Локация
- Iran
- Площадь m2
- 12,000 m2
- Тип системы
- Hybrid ZIP, Polycarbonate & Sandwich Panel Roofing System
Главная задача
A large recreational roof needed daylight transmission, indoor ventilation, waterproof integration, and coordination between transparent sections, operable openings, and insulated panels.
Инженерное решение
SIPANEL engineered roof zoning, automated ventilation opening integration, waterproof transitions, and support layouts for reliable environmental control.
Измеримый результат
The project delivered controlled daylight, automated roof ventilation, thermal insulation efficiency, and long-term waterproof performance.
Предотвращенные риски
- Ventilation system malfunction
- Water penetration at opening sections
- Thermal imbalance
Andimeshk Stadium
- Название проекта
- Andimeshk Stadium
- Локация
- Andimeshk, Khuzestan, Iran
- Площадь m2
- 6,000 m2
- Тип системы
- Sandwich Panel Roofing System
Главная задача
A double-curved stadium roof required sandwich panel coordination, structural alignment accuracy, waterproofing continuity, and controlled installation across arched geometry.
Инженерное решение
SIPANEL prepared structural alignment studies, panel layout drawings, drainage details, and installation sequencing for geometric precision and roof performance.
Измеримый результат
The stadium roof was delivered with reliable sandwich panel performance, accurate curved geometry, and controlled installation quality.
Предотвращенные риски
- Sandwich panel deformation
- Drainage failures
- Structural misalignment
Imam Khomeini Airport Hajj Passenger Terminal
- Название проекта
- Imam Khomeini Airport Hajj Passenger Terminal
- Локация
- Tehran, Iran
- Площадь m2
- 5,000 m²
- Тип системы
- Sandwich Panel & Polycarbonate System
Главная задача
The primary challenge was the extremely compressed schedule between project award and the return of Hajj pilgrims, requiring immediate completion and operational readiness.
Инженерное решение
Fast-track procurement, parallel installation activities, and integration of polycarbonate wall systems to maximize natural daylight within the hall.
Измеримый результат
Successful completion and handover of a 5,000 m² airport facility in less than seven days.
Предотвращенные риски
- Operational delays before Hajj return flights
- Airport capacity shortages
- Insufficient daylight inside waiting areas
Kermanshah Industrial University Petroleum Faculty
- Название проекта
- Kermanshah Industrial University Petroleum Faculty
- Локация
- Kermanshah, Iran
- Площадь m2
- 1,000 m²
- Тип системы
- Seismic-Responsive Glass Facade Connections
Главная задача
The key challenge was designing facade connections so that structural movement during earthquakes would not damage or break the glass panels.
Инженерное решение
Connection details were engineered to accommodate relative structural displacement and reduce stress transfer to the glass facade.
Измеримый результат
Successful execution of approximately 1,000 m² of glass facade, which reportedly performed without glass damage during the Kermanshah earthquake in the 1390s Solar Hijri decade.
Предотвращенные риски
- Glass breakage under seismic movement
- Facade connection failure
- Mismatch between structure and glass facade
Shalamcheh Border Gate
- Название проекта
- Shalamcheh Border Gate
- Локация
- Khuzestan, Iran
- Площадь m2
- 4,000 m²
- Тип системы
- Sandwich Panel System
Главная задача
The project required large unobstructed spans to accommodate heavy pedestrian and vehicle traffic while maintaining structural efficiency and climatic protection.
Инженерное решение
A lightweight space frame solution with sandwich panel roofing was selected to maximize span capability and accelerate construction.
Измеримый результат
Approximately 4,000 m² of covered border terminal infrastructure delivered.
Предотвращенные риски
- Traffic obstruction
- Construction delays
- Excessive structural weight
Bandar Mahshahr Urban Bus Terminal
- Название проекта
- Bandar Mahshahr Urban Bus Terminal
- Локация
- Bandar Mahshahr, Iran
- Площадь m2
- Approx. 4,000 m²
- Тип системы
- Space Frame with Insulated Composite Roofing
Главная задача
Providing shaded public space while ensuring durability against heat, humidity and corrosive environmental conditions.
Инженерное решение
A lightweight space frame combined with insulated sheet roofing and rock wool insulation was selected to improve thermal performance and durability.
Измеримый результат
Successful delivery of a large-scale terminal roof with efficient structural and thermal performance.
Предотвращенные риски
- Excessive solar heat gain
- Environmental corrosion
- Passenger circulation conflicts
Najafabad University Amphitheater
- Название проекта
- Najafabad University Amphitheater
- Локация
- Najafabad, Isfahan, Iran
- Площадь m2
- 4,000 m²
- Тип системы
- Sandwich Panel System
Главная задача
The project featured a highly complex architectural geometry including cantilevers, curved edges and irregular surfaces that required precise enclosure detailing.
Инженерное решение
Custom support details and enclosure assemblies were developed to preserve the architectural intent while maintaining durability and weather protection.
Измеримый результат
Successful execution of approximately 4,000 m² of architectural enclosure on a complex university landmark building.
Предотвращенные риски
- Architectural form distortion
- Water leakage at geometric transitions
- Excessive dead loads
Fadak Mall Glass Skylight
- Название проекта
- Fadak Mall Glass Skylight
- Локация
- Isfahan, Iran
- Площадь m2
- 500 m²
- Тип системы
- Glass Roofing System
Главная задача
The project required the installation of a glass enclosure over a three-dimensional elliptical form while maintaining geometric accuracy, waterproofing performance, and visual transparency.
Инженерное решение
Precise geometric control, custom glazing details, and installation management to achieve a seamless architectural skylight.
Измеримый результат
Successful completion of a 500 m² glass skylight delivering natural daylight to the mall atrium.
Предотвращенные риски
- Geometric distortion
- Water leakage
- Mismatch between structure and glazing
Marun Petrochemical Multipurpose Hall
- Название проекта
- Marun Petrochemical Multipurpose Hall
- Локация
- Mahshahr, Iran
- Площадь m2
- 5,000 m²
- Тип системы
- Sandwich Panel & Tensile Membrane
Главная задача
A critical engineering challenge was the development of a reliable structural interface between the tensile membrane system and the primary structure while maintaining load transfer integrity and long-term durability.
Инженерное решение
A dedicated connection assembly was engineered, analyzed and fabricated specifically for the interaction between the tensile membrane structure and the main supporting frame.
Измеримый результат
Successful completion of approximately 5,000 m² of hybrid enclosure within an active petrochemical environment.
Предотвращенные риски
- Stress concentration at membrane connections
- Wind-induced membrane failures
- Structural instability at force-transfer points
Toranj Kish Hotel Restaurant Roof
- Название проекта
- Toranj Kish Hotel Restaurant Roof
- Локация
- Kish Island, Iran
- Площадь m2
- Approx. 500 m²
- Тип системы
- Space Frame + Sandwich Panel Roofing
Главная задача
Construction in a highly corrosive marine environment with logistical and operational constraints.
Инженерное решение
A lightweight space frame system was selected to minimize dead loads and facilitate installation over water.
Измеримый результат
Successful completion of the restaurant roof structure in a demanding coastal environment.
Предотвращенные риски
- Marine corrosion
- Excessive structural weight
- Installation difficulties
Baharestan Prayer Hall
- Название проекта
- Baharestan Prayer Hall
- Локация
- Baharestan, Iran
- Площадь m2
- 1,000 m²
- Тип системы
- Sandwich Panel, Dry Ceramic Facade & Glass
Главная задача
The main challenge was installing dry ceramic cladding on steep roof surfaces where conventional dry-facade systems are typically not applicable.
Инженерное решение
Development and fabrication of custom connection systems capable of safely supporting ceramic panels on highly inclined roof geometries.
Измеримый результат
Successful execution of 1,000 m² of enclosure and facade works while maintaining architectural continuity between roof and wall surfaces.
Предотвращенные риски
- Ceramic panel slippage on inclined surfaces
- Connection failure under roof loads
- Discontinuity between roof and facade
Enghelab Club Padel Center
- Название проекта
- Enghelab Club Padel Center
- Локация
- Tehran, Iran
- Площадь m2
- 2,000 m²
- Тип системы
- Sandwich Panel System
Главная задача
The project required large clear spans while maintaining structural efficiency and architectural quality within an active sports complex.
Инженерное решение
A lightweight space frame structure combined with sandwich panels was selected to optimize span capability, construction speed and durability.
Измеримый результат
Approximately 2,000 m² of sports facility enclosure delivered with large unobstructed interior space.
Предотвращенные риски
- Excessive structural weight
- Obstruction of sports activities
- Construction delays
Maku Convention Hall
- Название проекта
- Maku Convention Hall
- Локация
- Maku, Iran
- Площадь m2
- 2,000 m²
- Тип системы
- Sandwich Panel System
Главная задача
The large-span curved geometry required precise installation to maintain weather-tightness, architectural consistency and structural performance.
Инженерное решение
A sandwich panel system was selected to combine lightweight construction, thermal efficiency and rapid installation.
Измеримый результат
Successful installation of approximately 2,000 m² of sandwich panel enclosure over the large-span structure.
Предотвращенные риски
- Water penetration
- Excessive roof dead load
- Construction delays
Gonabad University Sports Hall
- Название проекта
- Gonabad University Sports Hall
- Локация
- Gonabad, Iran
- Площадь m2
- 3,000 m²
- Тип системы
- Sandwich Panel System
Главная задача
The project required accurate installation of sandwich panels on a large curved roof while maintaining alignment, weather-tightness, and architectural consistency.
Инженерное решение
Careful installation sequencing and geometric control to ensure a uniform enclosure across the entire roof surface.
Измеримый результат
Successful completion of 3,000 m² of sandwich panel enclosure for a university sports facility.
Предотвращенные риски
- Curved roof alignment issues
- Mismatch between enclosure and structure
- Waterproofing deficiencies
Shahr Babak Wrestling Hall
- Название проекта
- Shahr Babak Wrestling Hall
- Локация
- Shahr Babak, Kerman, Iran
- Площадь m2
- 900 m2
- Тип системы
- ZIP Panel Roofing System
Главная задача
Multiple dome-shaped sports halls required curved ZIP panel coordination, structural alignment, waterproofing continuity, and visually consistent roof finishing.
Инженерное решение
SIPANEL prepared coordinated shop drawings, curved ZIP panel layouts, waterproofing details, and installation sequencing to maintain dome symmetry and drainage continuity.
Измеримый результат
Three dome-shaped wrestling halls were delivered with coordinated roof geometry, reliable ZIP panel performance, and controlled installation quality.
Предотвращенные риски
- Curved roof alignment errors
- Water penetration at dome transitions
- Installation sequencing conflicts
Shahr Babak Stadium Entrance
- Название проекта
- Shahr Babak Stadium Entrance
- Локация
- Shahr Babak, Kerman, Iran
- Площадь m2
- 700 m2
- Тип системы
- Aluminium Cladding System
Главная задача
A complex curved stadium entrance required precise aluminium cladding detailing, adaptable surface coordination, waterproofing continuity, and seamless facade integration.
Инженерное решение
SIPANEL combined aluminium cladding methods, curved flashing details, and installation sequencing to preserve architectural continuity and drainage control.
Измеримый результат
The entrance was delivered with precise architectural finishing, controlled facade integration, and weather-resistant performance.
Предотвращенные риски
- Facade alignment errors
- Surface waviness
- Water penetration at curved transitions
Payam Industrial City Ceramic Manufacturing Facility
- Название проекта
- Payam Industrial City Ceramic Manufacturing Facility
- Локация
- Karaj, Iran
- Площадь m2
- 4,500 m²
- Тип системы
- Space Frame + Sandwich Panel Roofing
Главная задача
Providing a large unobstructed production area while minimizing structural weight and construction time.
Инженерное решение
A lightweight space frame system was selected to achieve long spans and operational flexibility for ceramic manufacturing processes.
Измеримый результат
A 4,500 m² column-efficient production space optimized for manufacturing operations.
Предотвращенные риски
- Excessive structural weight
- Column obstruction in production area
- Construction delays
Tavanir Shahrekord Central Atrium
- Название проекта
- Tavanir Shahrekord Central Atrium
- Локация
- Shahrekord, Iran
- Площадь m2
- Approx. 350 m²
- Тип системы
- Spider Glass System
Главная задача
Providing maximum daylight and architectural transparency while maintaining structural efficiency.
Инженерное решение
A lightweight space frame integrated with spider glass fittings was selected to minimize visual obstruction and maximize transparency.
Измеримый результат
Completed transparent atrium enclosure delivering natural daylight and weather protection.
Предотвращенные риски
- Excessive structural weight
- Daylight reduction
- Visual obstruction
Bandar Abbas Mall
- Название проекта
- Bandar Abbas Mall
- Локация
- Bandar Abbas, Iran
- Площадь m2
- 700 m²
- Тип системы
- Sandwich Panel System
Главная задача
The project involved installing enclosure systems over a prominent curved space-frame roof located at the center of a commercial development where architectural quality was critical.
Инженерное решение
Careful geometric control, alignment of panel layouts with the curved structure, and detailed finishing works to achieve a continuous architectural surface.
Измеримый результат
Successful completion of 700 m² of sandwich panel roofing for the central atrium enclosure.
Предотвращенные риски
- Visual discontinuity on curved surfaces
- Geometry mismatch between roof and structure
- Panel alignment defects
Tiran Gas Station
- Название проекта
- Tiran Gas Station
- Локация
- Isfahan, Iran
- Площадь m2
- 600 m2
- Тип системы
- Sandwich Panel Roofing System
Главная задача
A fast-track public gas station required durable sandwich panel roofing, efficient sequencing, waterproofing reliability, and clean finishing under accelerated timelines.
Инженерное решение
SIPANEL optimized sandwich panel layouts, structural coordination details, fastening strategies, and drainage integration for speed and durability.
Измеримый результат
The gas station roofing system was completed with reliable weather protection, modern appearance, and controlled installation quality.
Предотвращенные риски
- Roof leakage
- Installation alignment errors
- Improper sealing execution
Eftekhar Commercial & Office Complex
- Название проекта
- Eftekhar Commercial & Office Complex
- Локация
- Isfahan, Iran
- Площадь m2
- 300 m²
- Тип системы
- Polycarbonate Roofing System
Главная задача
The roof structure had to be integrated between existing building blocks while maintaining waterproof performance and structural efficiency.
Инженерное решение
A lightweight space frame combined with polycarbonate panels was selected to create a column-free span with excellent daylight transmission.
Измеримый результат
Approximately 300 m² of covered atrium space delivered without intermediate supports.
Предотвращенные риски
- Water infiltration
- Excessive dead load
- Insufficient daylight
Rouzbeh Charity Complex
- Название проекта
- Rouzbeh Charity Complex
- Локация
- Zanjan, Iran
- Площадь m2
- 1,000 m²
- Тип системы
- Space Frame + Sandwich Panel Roofing
Главная задача
Installing a long-span roof over a multi-storey structure under construction while maintaining compatibility with the reinforced concrete building frame.
Инженерное решение
A lightweight space frame system combined with insulated sandwich panels was selected to optimize weight, speed, and thermal performance over the central atrium.
Измеримый результат
A fully covered central space providing approximately 1,000 m² of protected area integrated into the multi-storey building structure.
Предотвращенные риски
- Excessive dead load on building frame
- Construction delays from weather exposure
- Incompatibility with RC structure
Shahrood Azad University Central Skylight
- Название проекта
- Shahrood Azad University Central Skylight
- Локация
- Shahrood, Iran
- Площадь m2
- 400 m²
- Тип системы
- Polycarbonate Roofing System
Главная задача
The skylight was installed on an existing roof structure, requiring careful control of dead loads, waterproofing details and structural integration.
Инженерное решение
A dome-shaped space frame with multiwall polycarbonate panels was selected to provide uniform daylight while minimizing structural weight.
Измеримый результат
Approximately 400 m² of naturally illuminated interior space created without intermediate supports.
Предотвращенные риски
- Water leakage
- Excessive roof loading
- Insufficient daylight
Atlas Hotel Atrium
- Название проекта
- Atlas Hotel Atrium
- Локация
- Shahin Shahr, Isfahan, Iran
- Площадь m2
- 700 m²
- Тип системы
- Polycarbonate Roofing System
Главная задача
The atrium served as the focal public space of the hotel and required a lightweight, translucent enclosure capable of delivering natural daylight while preserving architectural quality.
Инженерное решение
Implementation of a polycarbonate enclosure to maximize daylight penetration, reduce structural weight, and maintain architectural continuity.
Измеримый результат
Successful completion of a 700 m² polycarbonate atrium enclosure, creating a bright and welcoming hospitality environment.
Предотвращенные риски
- Insufficient daylight in the atrium
- Excessive roof dead load
- Architectural discontinuity
Tarbiat Modares University Research Greenhouse
- Название проекта
- Tarbiat Modares University Research Greenhouse
- Локация
- Iran
- Площадь m2
- 400 m²
- Тип системы
- Polycarbonate Enclosure
Главная задача
The project required the installation of a transparent enclosure over a complex dome-shaped geometry while maintaining durability, daylight performance, and structural efficiency.
Инженерное решение
Implementation of lightweight polycarbonate panels combined with accurate geometric control of the space-frame structure.
Измеримый результат
Successful completion of approximately 400 m² of polycarbonate enclosure for research and experimental greenhouse applications.
Предотвращенные риски
- Insufficient daylight penetration
- Thermal performance issues
- Geometry mismatch
Sepehan Flower Market
- Название проекта
- Sepehan Flower Market
- Локация
- Dorcheh, Isfahan, Iran
- Площадь m2
- 3,500 m2
- Тип системы
- Sandwich Panel
Главная задача
A high-traffic commercial flower market needed durable sandwich panel roofing, fast installation, waterproofing control, and clean architectural finishing.
Инженерное решение
SIPANEL optimized panel layouts, installation sequencing, sealing checkpoints, and material coordination to support fast-track execution and reduce waste.
Измеримый результат
A durable commercial sandwich panel roofing system was delivered with reliable weather protection, efficient installation, and controlled finishing quality.
Предотвращенные риски
- Installation alignment errors
- Material waste
- Water penetration
Parand City Entrance Gate
- Название проекта
- Parand City Entrance Gate
- Локация
- Parand, Tehran, Iran
- Площадь m2
- 500 m2
- Тип системы
- Aluminium Cladding System
Главная задача
A special architectural city entrance needed custom aluminium cladding, curved geometry control, waterproofing continuity, and accurate finishing.
Инженерное решение
SIPANEL designed curved transition details, edge coordination systems, structural alignment strategies, and sealing workflows for architectural consistency.
Измеримый результат
The city entrance was delivered with precise geometry execution, durable aluminium cladding, and weather-resistant facade performance.
Предотвращенные риски
- Dimensional inconsistencies
- Facade sealing failures
- Curved alignment errors
Нужен такой уровень контроля для вашего проекта?
Отправьте тип проекта, локацию, примерную площадь, чертежи при наличии и главный риск, который SIPANEL должен проверить.